Call us at 0086-371-56576017Email:michelle@zzkehui.com.cnعربيEspañolрусский中文FrançaisEnglish
home > Inspection equipment

HS PA10 Phased Array Flaw Detector

    HS PA10 Phased Array Flaw Detector

    With high image resolution (1024*768 pixel, image can be shown more dedicate, flaw size and location can be shown with higher accuracy)
    With 60Hz display refresh rate, ensures the image reflects the scanning position
    With 32 elements transmit and receive


Features:

With high image resolution (1024*768 pixel, image can be shown more dedicate, flaw size and location can be shown with higher accuracy)

● With 60Hz display refresh rate, ensures the image reflects the scanning position

● With 32 elements transmit and receive signal synchronously, real time display A-scan, C-scan, D-scan, S-scan and L-scan image.

● With whole point DAC curve function, make DAC curve with unlimited point and compensation

● Optimal time-delay accuracy up to 1ns, make better focusing performance and better imaging, with dynamic Focusing function

● With max.300V transmit voltage (the emission power higher than domestic and foreign products)

●With high gain adjustment range (digital gain:30dB; analog gain:80 dB)

● With a high degree gate and sound path gate, automatic alarm when the defect is detected

● Support module extension, it can be extended with 4 pairs of TOFD channel and PE multi-channel.

● With simulation of various work-piece inspection (suitable for Plate weld, “T” type weld, corner weld, Pipe weld, forge piece and plates inspection)

● Support full record of encoder scanning

● With light-weight and easy carry.

 

Parameters:

Screen size: 8.4 inch

Screen resolution: 1024×768

Data Storage: internal 16GB, external USB storage

Extended Interface: USB2.0×4,10M/100MLAN×1,VGA×1

Power supply: 24V AC adapter, 14.8V lithium battery, with 2 adapters and 2 batteries

Working time: 4 hours (one battery-powered)

Weight:4.8Kg

Dimensions: 295 × 215 × 120 (mm)

Encoder interface: +5 V TTL level

Image scanning: A / C / D / S / L scan

System bandwidth: 0.5 - 15MHz (-3dB)

A/D sampling frequency: 105MHz/10bit

Repetition frequency: 1.6KHz - 4.6KHz

S-scan refresh rate: up to 60Hz

Active aperture: 32 elements

Maximum number of elements: 32

Delay line accuracy: 1ns

DAC: unlimited point

TCG: unlimited point

Rectification(s): Positive, Negative, Full Wave, RF

Transmit delay: 0-20us

Receive delay: 0-20us

Transmit voltage: 50V - 200V

Pulse width: 30ns - 1000ns, step: 10ns

Pulse type: Negative square wave

Gain: analog: 0-80dB,step 0.1dB; digital: 0-30dB, step 6dB

Focus: Transmit: single focus; Receive: dynamic focus

Extension: support module extension, it can be extended with 4 pairs of TOFD channel and PE multi-channel.

 

 



Copyright@2014 www.zzkehui.com all rights reserved     ICP备05020464
Connect with us :